FİZİKSEL ÖZELLİKLER

TECHNICAL ANALYSIS

Test Method: US Code of Federal Regulations Part 1500.44, Title 16 Flammability test on rigid and pliable solids: Pass Sample Burning Rate (inch/sec.) Polyester Resin Based Metalized Panel 0.004

*A sample is considered to have passed the test if the burning rate is not more then 0.10 inch per second. Test Method: As specified in AOAC 16th Ed. Section 973.32 & 973.82 Polyester resin-based metalized panel / bowl Lead & Cadmium content in earthenware quantilation by AAS: PASS

SGS LABORATORY NO.
EXTRACT, VOLUME (II)
LEAD, PPM (MG/L)
CADMIUM, PPM (MG/L)
14324 2.0 <1.0 <0.25
14324 2.0 <1.0 <0.25
14324 2.0 <1.0 <0.25
14324 2.0 <1.0 <0.25
14324 2.0 <1.0 <0.25
14324 2.0 <1.0 <0.25
Limit for FDA (any one of six)   1.0 ppm <0.25

1. <= less then 2. mg / L = milligrams per litter 3. ppm = parts per million AAS = ATOMIC ABSORPTION SOECTROPHOMETER

Conclusion: The client submitted samples described above comply with the leachable lead and cadmium requirements of the American Food and Drug Administration (FDA).

Test Method: Nitric Acid digestion and analyzed by Atomic Absorption Spectrophotometer. Test Sample: 04249 stone/Slate on Resin 12×12 tile size 6 x 12

To determine the soluble Heave Metal contents in accordance with the European Standard EN 71 part 3.1994+

A1:2000 - Migration of certain elements

Migration of Certain Element: 04249 Limit
Soluble Lead (pb), mg/kg: 12.7 90 mg/kg
Soluble Antimony (sb), mg/kg: <5 60 mg/kg
Soluble Arsenic (As), mg/kg: 0.2 25 mg/kg
Soluble Barium (Ba), mg/kg: <0.5 1000 mg/kg
Soluble cadmium (Cd), mg/kg: <0.5 75 mg/kg
Soluble Chromium (Cr), mg/kg : 7.5 60 mg/kg
Soluble Mercury (Hg), mg/kg: <0.5 60 mg/kg
Soluble Selenium (Se), mg/kg : <0.5 500 mg/kg

Methodology: with reference to EN 71 Part 3.1994 + A1:2000 by inductively coupled argon plasma (ICP-OES)Analysis 04249 Lead (Pb), ppm ND (None detected) detection limit for Pb is 5.0 ppm

DATA SHEET FOR THIN STONE VENEER

S:NO
MATERIAL
QUANTITY Kg./Sq.Mtr
1. PROCESSING MATERIAL 1.300
2. BACKING MATERIAL 0.150
3. NATURAL STONE 0.100
TOTAL WEIGHT PER SQ. MTR. 1.500 - 1.600
S:NO
THICKNESS OF MATERIAL PARTICULARS
IN MM
4. THICKNESS OF NATURAL STONE LAYER 0.40 mm
5. THICKNESS OF OTHER CHEMICALS BACKING 0.80 mm
6. TOTAL THICKNESS OF THIN SLATE STONE VANEER SHEET 1.20 mm - 1.50 mm
S:NO
TESTS CONDUCTED AT TESTING LABORATORY
IN INDIA WHICH IS ISO 90001:2000
APPROVED INTERNATIONALLY
TEST VALUE
PROTOCOL
Slate
Micra
7. WATER ABSORBTION % BY WT.
( TEST CARRIED OUT ON THIN SLATE STONE SPECIMEN )
2.50 1.90 ASTM C - 121
guidlines
8. WATER ABSORBTION % WT.
( TEST CARRIED OUT ON THIN SLATE SPECIMEN pasted on marble pıece )
0.17 0.12 ASTM C - 97
guidlines
9. ABRASION TEST
(AVERAGE WEAR, MM MAX WEAR ON INDIVIDUAL SPECIMEN MM)
0.07
0.08
0.09
1.0
IS:9162 - 1979 guidelines
10. DENSITY
(MASS PER UNIT AREA, KG/M2)
1.45 1.66 IS: 12866 - 1989
guidelines